AZRM Wheel set for Ferrari 641/2 1:12 Scale

AZMW 12004 updated 09/04/15
Brake sets designed to work with these are to follow.


These are machined parts to replace the kit parts for better detail.
They will include in each set:

2 x Rear Outer rims (Anodized Black)
2 x Front Outer rims (Anodized Black)
4 x Inner Rims (Same for front and rear)
4 x Air-valves
 

The first Images below are "rendered" from my software. The rest are the actual parts as they come out of the machine shop. You will see everything and how to put them together in the in the near future. Click the thumbnails for a larger image

NOTE: If you plan on using Thunder Valley's brake set with these wheels, you will have to drill out the center of the front wheel for their wheel nut to fit the rims. The nuts fit in the rears. You should be able to use the drill supplied by Thunder Valley for this. The boss on the hats is a very loose fit in the wheels. Once the wheel nut is installed it would center the wheels.

Home
About
News 01/01/21
Pre Orders
Ordering
Military items
Tools
Figures
1-12 Store.htm
1-20 STORE
1-24 STORE
1-43 & 64 STORE
MotoGP STORE
Sports Car STORE
Diecast Store
Lotus 72C 1:12
Finishing Materials
How To
Ref. Material
Race Trips
Links
Model Factory

Home
AZRM News
About
Pre Orders
Ordering
Military items
Tools
Figures
1-12 STORE
1-20 STORE
1-24 STORE
1-43 & 64 STORE
MotoGP STORE
Sports Car STORE
Diecast Store
Lotus 72C 1:12
Finishing Materials
How To
Ref. Material
Race Trips
Links
Model Factory

Home
AZRM News
About
Pre Orders
Ordering
Military items
Tools
Figures
1-12 STORE
1-20 STORE
1-24 STORE
1-43 & 64 STORE
MotoGP STORE
Sports Car STORE
Diecast Store
Lotus 72C 1:12
Finishing Materials
How To
Ref. Material
Race Trips
Links
Model Factory

Box

Close up of spoke edge

Close up of wheel center

Rear rim

Front rim

Front

Rear

Packaged to go to Anodizing on 8/28/15 (52 sets of wheels)

Back from Anodizing.

Wheels in box

Box